BULGARIAN
 
  POLISH
 
  FRENCH
  ENGLISH
 
  SPANISH
 
Company Environment Surface treatment Industrial Quality Contact Site map
   
MR53T CONVEYOR SCREW

General description

MR53T CONVEYOR SCREW. Specially designed unit for conveying solid waste from a waste water roughing operation (Gratings and Screens, etc).

Solids collected in the loading hopper, are conveyed via the worm screw to the discharging point.

Descriptions and characteristics:

Conveying channel.  Made from stainless steel plating. The top part is closed off by screwed down covers which, when disassembled, make it easy to inspect and clean the unit. The anchor feet which incline the channel, are attached at the end thereof.

Worm screw. This is a coreless conveyor screw, made from carbon steel or stainless steel. When it rotates, it bears on a cradle of anti-wear polyethylene.

Drive unit. Consist of a motor reducer unit and a module for fastening to the worm gear.

Loading hopper. Hopper through which the waste enters the feed screw, fastened by screws to the conveyor channel.

 

 

Pictures (Click to see more pictures )

 

Channel gate
Wall gate
Regulable guillotine weir
Pivoting regulable weir
Longitudinal screen
Longitudinal screen
Longitudinal screen
Fine screen
Screw screen
Static fine screen "TAMISTATIC"
Rotative drum screen "ROTOTAMIZ"
Chain filter
Conveyor screw
Compacting screw
Compact pretreatment
Longitudinal bridge
Grit removal worm screw
Grit removal
Grease concentrator
Grease concentrator with tank
Longitudinal bridge
Circular clarifier
Circular suction scraper bridge
Spillway and deflector (Baffle)
Thickener
Aeration turbine
Aeration rotor